RUS
ENG
 
 

Industrial phones

“TAP-2405” and “TAP-2406”

Phone for control posts 2405 with wall mounting, without dialer is supposed to be used with manual switchboards SOS-30M, POS-90 and other similar switchboards with voltage from 54 to 72 V, under t -40 to +45°С and air humidity up to 98 % under 25°С.
The phone provides communication through the circuit with attenuation equal to 31,5 dB.
Splash-proof (protection rate is IP03 according with State Standard 14254-80).
Additionally, there is calling device “Revun-2”.

Phone for control posts 2406 with wall mounting, without dialer is supposed to be used with manual switchboards KOS-8, KOS-22M with supply voltage 24+-2V and switchboards “Crystal”, “Pskov” with voltage from 54 to 76 V in the subway.
This phone can be used in four-wire lines for communication in tunnels ( with voltage 24+-2V) under -40 to +45°С and air humidity up to 98 % under 25°С.
The phone provides communication through the circuit with attenuation equal to 31,5 dB.
Splash-proof (protection rate is IP03 according with State Standard 14254-80).
Additionally, there is calling device “Revun-2”.

“AT-218”

The phone of LB system with induction call can be used for direct communication and connection to the lines of MSC`s. Supply voltage is 3-6V from any power source with supply current up to 100 mA.
“AT-218” provides communication under surrounding noise rate up to 60 dB with attenuation equal to 21,7 dB, under 0 °С to 45 °С and air humidity up to 90 % under 25°С.

Calling device “Revun”

This device reproduces an audio signal, which clearly stands out among other surrounding noises. It has two modifications:
- “Revun-1” – can be used as independent calling device or as auxiliary device in various communication systems.
- “Revun-2” – can be used together with phones or other equipment that provide series connection of capacitor (1 microfarad) to magnetic coil of this device when a call occurs.
Supply current is 50 V with frequency rate 50 Hz
“ТАК-64”

Stateroom phone with rotary dialer for communication between parties of the shipborne ASC`s or branch exchange under line resistance up to 1500 Ohm and supply voltage from 24 to 60 V.
This phone expects usage in the enclosed areas. Operating is also possible in conditions of both arid and dewy tropical climate: under temperature from -10 to +50 °С and air humidity up to 98% under 40°С.
“ТАК-64” provides stable communication under surrounding noise rate up to 100 dB.
The phone can be fastened on the table. The handset is held on the cabinet with help of a device that excludes false call caused by vibration and turn in vertical plane up to 180°С.
In the darkness the symbols on the dialer can be distinguished 0,5m away from the phone.

“ТАК-64K”

Stateroom phone with button dialer for communication between parties of the shipborne ASC`s or branch exchange under line resistance up to 1500 Ohm and supply voltage from 24 to 60 V, using decade or multifrequency code.
This phone expects usage in the enclosed areas. Operating is also possible in conditions of both arid and dewy tropical climate: under temperature from -10 to +50 °С and air humidity up to 98% under 40°С.
“ТАК-64” provides stable communication under surrounding noise rate up to 100 dB.
The phone can be fastened on the table. The handset is held on the cabinet with help of a device that excludes false call caused by vibration and turn in vertical plane up to 180°С.

“TAS-M-4K”, “TAS-M-4” and “TAS-M-4CB” ship phones

This phone has following modifications:
- With button dialer using decade or multifrequency code;
- With rotary dialer;
- Without dialer.
The phone is supposed for communication between parties of the shipborne ASC`s or branch exchange under line resistance up to 1500 Ohm and supply voltage from 24 to 60 V. Operating temperature is from -40° to 50° С.
“TAS-M-4K”, “TAS-M-4” and “TAS-M-4CB” have waterproof cabinet and can be placed on the ship decks, and have protection against single blows with high acceleration rate as well.
“TAS-M-6K”, “TAS-M-6” and “TAS-M-6CB” ship phones

These compact phones have three modifications:
- With button dialer using decade or multifrequency code;
- With rotary dialer that provides recognition of the symbols on the dialer 0,5m away from the phone in the darkness.
- Without dialer.

Wall mounting is provided. The phone is supposed for communication between parties of the shipborne ASC`s or branch exchange under line resistance up to 1500 Ohm and supply voltage from 24 to 60 V, have protection against single blows with high acceleration rate as well.

шахтный телефон“TASH-1319” mine phone

This phone is supposed to be used together with equipment of automated mine communication “Disk-SHATS”, “DKSG-1V” with the device URI, automated station “UATS-49”, “ATSK-100/2000”, “UATSK-100/2000” and “UPATS-100/400”.
“TASH-1319” has a dust-ignition-proof construction and dust-splash protection according to State Standard (IP54 SS 14254-80).
The phone provides stable communication under surrounding noise rate up to 80 dB with tract attenuation equal to 28,7 dB, line attenuation – 13 dB.
Calling signal rate is not less than 90 dB 0,5m away from the phone. When the phone is connected to the common lines dust-ignition protection is lost.

“TASH-1319K”

The phone has button dialer using decade and multifrequency code. “TASH-1319K” is supposed to be used together with equipment of automated mine communication “Disk-SHATS”,”KDHM” , “DKSG-1” with the device URI, automated station “UATS-49”, “ATSK-100/2000”, “UATSK-100/2000” and “UPATS-100/400”.
“TASH-1319” has a dust-ignition-proof construction and dust-splash protection according to State Standard (IP54 SS 14254-80).
The phone provides stable communication under surrounding noise rate up to 80 dB with tract attenuation equal to 28,7 dB, line attenuation – 13 dB.
Calling signal rate is not less than 90 dB 0,5m away from the phone. When the phone is connected to the common lines dust-ignition protection is lost.
 
“TASH-2305”
Mine phone without dialer is supposed for usage together with manual switchboard URTS/100/600 with the device URI.
Syllable intelligibility is not less than 57% when connected in the tract with common attenuation equal to 28,7%, and surrounding noise rate up to 80 dB.
Calling signal rate is not less than 90 dB 0,5m away from the phone.
Rate of signal transferring is from +2dB to – 11dB, under load equal to 600Ohm with frequency 100 Hz.
Resistance of the phone when the handset is picked up is no more than 320 Ohm.
Operating temperature is from -40° to +40° С and air humidity equal to 98% under 25°С.
“TASH-2305” expects usage for local communication in mines, pits and open areas.
Weight: no more than 4kg.
 

“МТ-62”

The handset for phones “AMT-69” and “AGT-69”.
 

“МТ-69”

This handset is supposed to be used together with portable equipment with current voltage 12,6V. Operating temperature is from -30° to +50° С and air humidity equal to 95-98% under 40°С. Output voltage under sound pressure equal to 1,5 Pa 50±10 мВ and frequency 1000Hz.

“МТ-428” и “МТ-503”

The handset for card-phones “TMGS-15280”.
 

Contacts:

+7(342) 239-09-17
Elena Levenetz - Chef of import & export department
© 2009-2010 OJSC “Perm Telephone Plant Telta”.
All rights reserved
e-mail:sale@telta-perm.ru
Rambler's Top100 Web-design - "DECO-corp"